# Rapsberry Pi MQTT monitor Python script to check the cpu load, cpu temperature, free space, used memory, swap usage, voltage and system clock speed on a Raspberry Pi computer and publish the data to a MQTT broker. I wrote this so I can monitor my raspberries at home with [home assistant](https://www.home-assistant.io/). The script was written and tested on Python 2 but it should work fine on Python 3. The script if very light, it takes 3 seconds as there are 5 half second sleeps in the code - due to mqtt having problems if I shoot the messages with no delay, this is only if you choose to send the messages separately, now the script support a group CSV message that don't have this delay. Each value measured by the script is send via a separate message for easier craetion of home assistant sensors. Example message topic if ```group_messages = False ```: ``` masoko/rpi4/cpuload ``` - first part (masoko) is the main topic configurable via the ```config.py``` file. - second part (pi4) is the host name of the raspberry which is automatically pulled by the script, so you don't have to configure it for each installation (in case you have many raspberries like me). - third part (cpuload) is the name of the value (these are all values published via MQTT - cpuload, cputemp, diskusage, voltage, sys_clock_speed). Example message topic if ```group_messages = True ```: ``` masoko/rpi4 ``` The csv message looks like this: ```csv 9.0, 43.0, 25, 25, 0.85, 1500, False, False ``` Disabled sensors are represented with False in the message. # Installation If you don't have pip installed: ```bash $ sudo apt install python-pip ``` Then install this module needed for the script: ```bash $ pip install paho-mqtt ``` Copy ```/src/rpi-cpu2mqtt.py``` and ```/src/config.py.example``` to a folder of your choise (I am using ```/home/pi/scripts/``` ) and rename ```config.py.example``` to ```config.py``` # Configuration Populate the variables for MQTT host, user, password and main topic in ```config.py```. You can also choose what messages are send and what is the delay (sleep_time is only used for multiple messages) between them. If you are sending a grouped message and you want to delay the execution of the script you need to use the ```random_delay``` variable which is set to 30 by default. This is the default configuration: ``` random_delay = randrange(30) group_messages = True sleep_time = 0.5 cpu_load = True cpu_temp = True used_space = True voltage = True sys_clock_speed = True swap = False memory = False uptime = True ``` If the ```group_messages``` is set to true the script will send just one message containing all values in CSV format. The group message looks like this: ``` 1.3, 47.1, 12, 1.2, 600, nan, 14.1, 12 ``` Test the script. ```bash $ /usr/bin/python /home/pi/rpi-mqtt-monitor/rpi-cpu2mqtt.py ``` Once you test the script there will be no output if it run OK but you should get 5 messages via the configured MQTT server (the messages count depends on your configuration). Create a cron entry like this (you might need to update the path in the cron entry below, depending on where you put the script files): ``` */2 * * * * /usr/bin/python /home/pi/rpi-mqtt-monitor/rpi-cpu2mqtt.py ``` # Home Assistant Integration ![Rapsberry Pi MQTT monitor in Home Assistant](images/rpi-cpu2mqtt-hass.jpg) Once you installed the script on your raspberry you need to create some sensors in home assistant. This is the sensors configuration if ```group_messages = True``` assuming your sensors are separated in ```sensors.yaml``` file. ```yaml - platform: mqtt name: 'rpi4 cpu load' state_topic: 'masoko/rpi4' value_template: '{{ value.split(",")[0] }}' unit_of_measurement: "%" - platform: mqtt state_topic: 'masoko/rpi4' value_template: '{{ value.split(",")[1] }}' name: rpi4 cpu temp unit_of_measurement: "°C" - platform: mqtt state_topic: 'masoko/rpi4' value_template: '{{ value.split(",")[2] }}' name: rpi4 diskusage unit_of_measurement: "%" - platform: mqtt state_topic: 'masoko/rpi4' value_template: '{{ value.split(",")[3] }}' name: rpi4 voltage unit_of_measurement: "V" - platform: mqtt state_topic: 'masoko/rpi4' value_template: '{{ value.split(",")[4] }}' name: rpi4 sys clock speed unit_of_measurement: "MHz" - platform: mqtt state_topic: 'masoko/rpi4' value_template: '{{ value.split(",")[5] }}' name: rpi4 swap unit_of_measurement: "%" - platform: mqtt state_topic: 'masoko/rpi4' value_template: '{{ value.split(",")[6] }}' name: rpi4 memory unit_of_measurement: "%" - platform: mqtt state_topic: 'masoko/rpi4' value_template: '{{ value.split(",")[7] }}' name: rpi4 uptime unit_of_measurement: "days" ``` This is the sensors configuration if ```group_messages = False``` assuming your sensors are separated in ```sensors.yaml``` file. ```yaml - platform: mqtt state_topic: "masoko/rpi4/cpuload" name: rpi4 cpu load unit_of_measurement: "%" - platform: mqtt state_topic: "masoko/rpi4/cputemp" name: rpi4 cpu temp unit_of_measurement: "°C" - platform: mqtt state_topic: "masoko/rpi4/diskusage" name: rpi4 diskusage unit_of_measurement: "%" - platform: mqtt state_topic: "masoko/rpi4/voltage" name: rpi4 voltage unit_of_measurement: "V" - platform: mqtt state_topic: "masoko/rpi4/sys_clock_speed" name: rpi4 sys clock speed unit_of_measurement: "hz" - platform: mqtt state_topic: "masoko/rpi4/swap" name: rpi4 swap unit_of_measurement: "%" - platform: mqtt state_topic: "masoko/rpi4/memory" name: rpi4 memory unit_of_measurement: "%" - platform: mqtt state_topic: "masoko/rpi4/uptime_days" name: rpi4 uptime unit_of_measurement: "days" ``` Add this to your ```customize.yaml``` file to change the icons of the sensors. ```yaml sensor.rpi4_voltage: friendly_name: rpi 4 voltage icon: mdi:flash sensor.rpi4_cpu_load: friendly_name: rpi4 cpu load icon: mdi:chip sensor.rpi4_diskusage: friendly_name: rpi4 diskusage icon: mdi:harddisk sensor.rpi4_sys_clock_speed: icon: mdi:clock sensor.rpi4_cpu_temp: friendly_name: rpi4 cpu temperature sensor.rpi4_swap: icon: mdi:folder-swap sensor.rpi4_memory: icon: mdi:memory ``` After that you need to create entities list via the home assistant GUI. You can use this code or compose it via the GUI. ```yaml type: entities title: Rapsberry Pi MQTT monitor entities: - entity: sensor.rpi4_cpu_load - entity: sensor.rpi4_cpu_temp - entity: sensor.rpi4_diskusage - entity: sensor.rpi4_voltage - entity: sensor.rpi4_sys_clock_speed - entity: sensor.rpi4_swap - entity: sensor.rpi4_memory - entity: sensor.rpi4_uptime ``` # To Do - maybe add network traffic monitoring via some third party software (for now I can't find a way to do it without additional software)